BORE CLEANING SOLUTION TS-250, 16 oz
With Copsenal – Contains No Ammonia
With Copsenal – Contains No Ammonia
- Fast-Acting, Barrel Safe, Non-Ammonia Bore Cleaner
- Will Not Etch Or Harm Barrel Steels And Can Be Safely Left To Soak In The Bore For An Infinite Period Of Time
- Contains A Short Term Rust Preventative, Which Shields And Conditions The Firearm’s Bore After Cleaning
MADE IN THE USA
Barrett Heavy Bore Cleaner is a premium cleaner designed to remove powder fouling, copper, lead, and moly without harming the bore. Barrett Heavy Bore Cleaner penetrates deeply into the steel to clean and protect against corrosion.
Directions:
WARNINGS:
ENSURE FIREARM IS UNLOADED AND AREA IS CLEAR OF ALL AMMUNITION.
ENSURE FIREARM IS UNLOADED AND AREA IS CLEAR OF ALL AMMUNITION.
Cleaner may damage anodized parts if left in contact for more than 20 minutes.
- Wet 2 to 3 patches with Barrett Heavy Bore Cleaner and push through bore to remove any loose fouling. Only push patches through in one direction. Do not pull patches back through the barrel.
- Make 10 to 15 passes with a tight fitting NYLON bore brush saturated with Barrett Heavy Bore Cleaner.
- Repeat step 1 and wait 3 to 5 minutes.
- Push dry patches through the bore until they come out clean.
- Before storing firearm, dampen a patch with Barrett Heavy Bore Cleaner and push through the bore.
- Before using the firearm, always run a dry patch though the bore. This will remove any residue and ensure against obstructions
